Ultra Start 450 SERIES Spécifications télécharger pdf (Page 8)

REMOVING THE EJECTOR

- Hold the whisk by

the wires in one

hand.

- With the other

hand, pull the

ejector in the

direction of the

arrow (see figure).

USES &

EXAMPLES

The mixer function makes it possible to carry out all

types of processing in the minimum of time, while

the whisk function enables you to whisk and mix

the preparation. We thus recommend that you

supervise all food preparations carefully in order to

obtain the best results.

- As you push the whisk into the whisk holder drive

shaft , rotate it slightly in order to slot the drive

lugs into the notches of the drive shaft ,

thereby locking the whisk into place inside the

shaft.

- To check that the whisk is properly fixed inside the

shaft , gently tug the metal wires.

- Repeat this procedure with the second whisk. If

you cannot push it in properly, remove it, rotate it

90° and start again.

REMOVING THE WHISKS FROM THE WHISK HOLDER

Pull the ejector

in direction to the

arrow, gripping the

ejector in one hand

and the holder

in the other.

• WHISK FUNCTION (MP 350 Combi Ultra,

MP 450 Combi Ultra, MP 450 FW Ultra)

ATTACHING THE WHISK HOLDER TO THE MOTOR

UNIT.

- Check that the machine is not plugged in.

- Align the flat side of the conical part of

the whisk holder with the catch on the

inside of the aluminium casing.

- Insert the whole of the conical part of the whisk

holder into the aluminium casing.

- Turn the whisk holder in the direction of the arrow

(see figure) until it is locked into place moderately

tightly.

CATERING AND RESTAURANT WORK

Blade Function

• Soups

• Vegetable purees : carrots, spinach, celery, turnips,

French beans, etc.

• Mousses : vegetable, fish

• Fruit compotes

• Sauces : green, rouille, remoulade, cream emulsions,

tomato or parsley

• Bisques : langoustines and shellfish

• Pancake batter

The foot, the blades and the whisks can be

entirely dismantled, (Robot-Coupe’s exclusive

patented system), thereby ensuring easy

cleaning, perfect hygiene and simple

maintenance.

REMOVING THE CASING

- Check that the machine is not plugged in.

- Turn the whisk holder in the opposite direction to

that used when attaching it.

- When it will go no fur ther, remove the whisk

holder from the aluminium casing.

FITTING THE WHISKS INTO THE WHISK HOLDER

- Grasp the holder in one hand.

- With the other hand, take the first whisk and insert

the shaft into the bore of the whisk holder

drive shaft. Make sure the drive lugs are

properly aligned with the notches.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Commentaires sur ces manuels

Pas de commentaire

Ultra Start 450 SERIES Spécifications Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Électronique des véhicules automobiles Ultra Start 450 SERIES