Ultra Start 1600 Manuel de service télécharger pdf (Page 16)

Ultraview 1500/1600 Monitors — Service Manual

2-6

Console Mounting

90364 Monitor

The physical layout and other console characteristics depend on the requirements of the hospital or

other institution. It is the responsibility of the institution to define its specific console needs and to

design and construct the console according to its specifications.

For this reason, Spacelabs Medical does not supply a pre-fabricated console assembly. Instead, this

section provides the information necessary to create a custom console design. In designing the

console, the following considerations must be kept in mind.

• Access

The rear of the console must be designed to allow for easy access. The dimensions of the rear

access door must allow the 90364 and display monitor to be easily installed and removed.

• Cooling

The console cabinet must be designed to allow sufficient air flow for natural convection. If the

console cabinet is enclosed, one of two cooling methods can be used:

Central air conditioning — The console can be connected directly to an air conditioning

cooling duct. The maximum ambient air temperature should be limited to approximately

32° C, and vented from the console at the highest exit.

Forced air fan — Small, quiet muffin fans rated at 100 cubic feet per minute (CFM) or

equivalent (to be provided by the institution) can be installed. In this case, provide one fan

for every central station or two system printers/module recorders that are installed in the

console.

• The 90364 does not contain a fan.

• If a network printer is to be installed in the console, the power dissipation and

dimensional requirements will be different. Refer to the printer specifications for

further information.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 123 124

Pas de commentaire

Ultra Start 1600 Manuel de service Page 16